1. Product introduction:

  The CTS-50 impact specimen notch projector is designed according to the actual needs of the current domestic users and the requirements for impact specimens in the national standard.

It’s developed to check the Charpy V-shaped or U-shaped notch contour and project it on the projection screen.

Comparing the notch standard template diagrams, to determine whether the notch processing of the tested impact sample is qualified, the comparison is intuitive, the operation is simple, and the efficiency is high.

It is a necessary special equipment for physical and chemical laboratory. This product meets the requirements of GB/T229-2007 "Charpy Pendulum Impact Test Method for Metallic Materials"

It can also meet international standards such as ASTM E23-02a.

2. Main technical parameters:

1. Projection screen diameter: 180mm

2. Rotation range of worktable: 0-360°

3. Worktable size: square worktable size: 110×125mm,

Diameter of square table: 90mm, diameter of table glass: 70mm

4. Workbench stroke: vertical: ±10mm, horizontal: ±10mm, lift: ±12mm

5. Magnification: 50X

6. Light source: 12V 100W (halogen lamp)

7. Power supply: 220V 50Hz 150W

8. Dimensions: 515×224×603mm

9. Weight: 18Kg